Model 987 Compact Air Cleaning System

The Extract-All Model S-987 compact air cleaning system gives you a safer, healthier workplace by capturing and removing contaminants at the source.
The system collects and filters smoke, dust and odors from:
. Soldering
. Wire stripping
. Solvents
. Heat bending
. Dental grinding
. Mixing powders and chemicals
. Jewelry buffing
. Light welding, sanding and grinding
. Light to moderate industrial and laboratory activities
. 6 in. deep full acrylic hood. Attaches with magnets
. Partial hood and two intake-limiting covers (the partial hood may be positioned above, between, or below the covers.) Hood is acrylic: hood and covers attach with magnets
. Acrylic deflector to divert air away from the work area. Attaches with magnets
. An inlet cover with two 2 1/2 in. diameter, self-supporting articulating extractor arms. Arms are made of heavy duty, chemical, abrasion, and heat resistant polypropylene with flame retardant characteristics. Reach is from 36 to 53 in. If you prefer to remove the standard prefabricated hoods, the ends of the arms can be flared up to 3 3/4 in. in diameter or as small as 2 in. in diameter. If only one arm is required, the other arm may be removed and the inlet covered with a cap which is included as a standard option. You can mount the S-987-2 or S-987-2A vertically or horizontally on a benchtop or floor.